10 MC COMPACTOR

To view the data sheet, you must be registered or logged in.

Login Register

- Rear camera system
- Sewage discharge valve
- Lighthouse work
- Led flashing gyrofares
- toolbox
- Emergency mushrooms
- Back cap
- Audible warning for processing and reverse phases
- Seat belts with protective bulkhead
- Shovel and broom holder

 

Technical data	Value
Volume m³	10
MTT kg	11.900
Vehicle wheelbase mm	3.105
Height mm	3.200
Max length mm	6.920
Max width mm	2.310
Vehicle equipped with tare kg	9.250
Useful capacity kg	2.650

Setup
The ISR compactor is required to carry out the collection service
along the streets and narrow alleys, where the car has to ensure
A maximum width of 2.2 m and a height of less than 2.9 m.
The construction qualities, materials used and robustness are typical
Of the larger Autobren compactors. The report
compression of 6/1 and the particular geometry of the hopper
guarantee high performance. Particular attention has been paid to the adoption
Of high-profile gasket interposed between caisson and cap
to ensure perfect containment of all liquids from the
collection of wet fractions. The ISR is typically installed in
Reduced-height chassis to make it easier for drivers to enter the cab
Who also perform the function of the ground operator. Found
housing the container vault lift device in accordance with en
840 and the rear footboards in accordance with EN 1501-1.